Power Supplies

SKU: LB-12V3A | Brand: Little Bird

A regulated 12V 3A (36W) switching power supply that comes with multiple interchangeable DC plug adapters for compatibility with a wide range of 12V devices. Suitable for powering routers, LED strips, single-board com...

SKU: DF-DFR1026 | Brand: DFRobot

This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity in...

SKU: SF-COM-18375 | Brand: SparkFun

This is a high grade DC Buck converter that inputs 6 to 12V and outputs 5V up to 3A or 15W. With good thermal performance and protection, this DC block is perfect for battery applications (such as SLAs or LFPs) that n...

SKU: DF-DFR0568 | Brand: DFRobot

This compact DC-DC buck-boost converter automatically steps voltage up or down to deliver a stable 3.3 V output from a wide 2.5–15 V input range. With a maximum output current of 600 mA and ultra-low 180 µA quiescent ...

SKU: SF-PRT-00119 | Brand: SparkFun

DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack, with a 2.1mm center pole diameter. Datasheets: Datasheet

SKU: SF-PRT-13126 | Brand: SparkFun

This female barrel jack plug is great for adding a common connector to the end of wires. This jack is compatible with 5.5x2.1mm barrel connectors. The outer shell unscrews to reveal solder terminals and a crimp strain...

SKU: DF-FIT0471 | Brand: DFRobot

INTRODUCTION This is a small DC - DC boost module that converts a 0.9 ~ 5v power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small ...

SKU: DF-DFR1208 | Brand: DFRobot

##Introduction This DC-DC step-down converter module is designed to efficiently reduce a high input voltage (15-24V) to a stable 12V output, supporting up to 12A of current. The module offers high conversion efficienc...

SKU: AF-5474 | Brand: Adafruit

A comprehensive set of 30 barrel jack plug adapters that convert a standard 5.5mm / 2.1mm DC jack to a wide variety of other tip sizes. Perfect for powering devices that use non-standard barrel connectors from your ex...

SKU: DF-FIT0784 | Brand: DFRobot

A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards fro...

SKU: DF-FIT0783 | Brand: DFRobot

A DC 5.5×2.1mm female to Micro-USB male power adapter plug, allowing you to power Micro-USB devices from a DC barrel jack power supply. Useful for powering Raspberry Pi, LattePanda, phones, and tablets from existing D...

SKU: SF-COM-18376 | Brand: SparkFun

An industrial-grade DC buck-boost converter that accepts 8–40V input and delivers a regulated 12V output at up to 3A (36W). Ideal for battery-powered systems where input voltage varies — such as SLA or LiFePO4 batteri...

SKU: AF-4552 | Brand: Adafruit

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter...

SKU: AF-4739 | Brand: Adafruit

This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 5V output with up to 1.2A current. It's great for supplying power to popular 5V voltage circuits from a range of b...

SKU: DF-DFR0494 | Brand: DFRobot

An uninterruptible power supply HAT for Raspberry Pi that provides steady power during outages, protecting your system from damage and ensuring safe shutdown. Ideal for mobile applications like Raspberry Pi cameras, t...

SKU: AF-1351 | Brand: Adafruit

A simple 2-way DC barrel jack splitter that lets you power two devices from a single power adapter. Plug in one standard 5.5mm/2.1mm DC barrel jack and get two identical outputs — perfect for powering multiple boards ...

SKU: AF-1466 | Brand: Adafruit

This UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 4A (4,000mA / 20W) via a standard 5.5×2.1mm centre-positive DC barrel jack. It accepts 110–240V AC input and is ideal for powerin...

SKU: DF-DFR0105 | Brand: DFRobot

Most project of Arduino may need more than two voltage supply. When feed with from 4.5-35V, this arduino power shield able to provide a voltage range from 1.25-12V with 3A peak current. Ideal for servo control and ot...

SKU: AF-2745 | Brand: Adafruit

Your power supply problems just got SUPER SOLVED! This 3.3V Buck Converter Breakout board is great for supplying power to low voltage circuits from a single Li-Ion cell battery or USB power...

SKU: AF-2788 | Brand: Adafruit

A DC barrel jack adapter cable that converts a 3.5/1.3 mm or 3.8/1.1 mm DC plug to the standard 5.5/2.1 mm DC barrel jack format. Internal spring contacts accommodate outer diameters from 3.5 mm to 3.8 mm, making it v...