Power Supplies

SKU: AF-4683 | Brand: Adafruit

This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 3.3V output with up to 1.2A current. It's great for supplying power to popular 3.3V voltage circuits from a range of ...

SKU: SF-BOB-15035 | Brand: SparkFun

Do you need to power a project with 12V and 5V from one power supply? The ATX power connector breakout board breaks out the standard 4-pin computer peripheral port when mated with an ATX connector for your 12V and 5V ...

SKU: PL-2833 | Brand: Pololu

The compact (0.5″ × 0.7″) D24V10F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 1 A....

SKU: AF-5991 | Brand: Adafruit

The Adafruit USB Type C Power Delivery Dummy (I2C or Switchable) lets you tap into USB-C Power Delivery to get 5V, 9V, 12V, 15V, 18V, or 20V from any compatible USB-C charger or wall adapter — no soldering required. B...

SKU: SF-DEV-21868 | Brand: SparkFun

The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the...

SKU: DF-DFR0929 | Brand: DFRobot

This industrial-grade 50W high-power step-down module offers a voltage input range of 9-18V and a maximum output of 5V/10A. It has the characteristics of high isolation withstand voltage of 1500V DC or 800V AC, low ra...

SKU: DF-DFR0758 | Brand: DFRobot

This fast-charging module comes with both USB and Type-C ports, supporting 10.5-32V voltage input and 5V/3A output, and multiple charging protocols.With steady output, this Fast Charge Module is able to work for a lon...

SKU: AF-3573 | Brand: Adafruit

The Adafruit TPL5111 Low Power Timer Breakout turns any electronics project into a low-power system by periodically toggling an enable pin. Connect it to your project's enable line, and the TPL5111 will handle the res...

SKU: DF-DFR0570 | Brand: DFRobot

This is a DC-DC buck-mode power module, with input voltage range 5.5~28V and fixed output voltage/current 3.3V/3A. Its work frequency can reach to 0.5MHz. The module has high conversion and tiny body, convenient to em...

SKU: PR-PIM612 | Brand: Little Bird

A range of compact, convenient USB-C LiPo/LiIon battery chargers, perfect for feeding hungry batteries. We've spent quite a lot of time at Pirate HQ over the last few weeks figuring out ways to charge up batteries fo...

SKU: MM-SKU00074 | Brand: Monk Makes

The MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit. This tiny board has a standard DC barrel jack socket at one end and provides a regulated 3.3V output that you can use to powe...

SKU: PL-2855 | Brand: Pololu

The D24V22Fx family of step-down voltage regulators generates lower output voltages from input voltages as high as 36 V. They are synchronous switching regulators (also called switched-mode power supplies (SMPS) or DC...

SKU: PL-2851 | Brand: Pololu

The Pololu D24V50F5 is a high-efficiency step-down (buck) voltage regulator that converts input voltages up to 38V down to a fixed 5V output. With a typical maximum output current of 5A and efficiency between 85% and ...

SKU: LB-COINBOARD | Brand: Little Bird

In compliance with Australian laws addressing the potential hazards associated with coin cell batteries, especially for small children, we're thrilled to present our innovative alternative – the Micro-USB Powered C...

SKU: DF-DFR0756 | Brand: DFRobot

This USB fast-charge module integrates the most common 5V charging recognition function and provides compatibility for more than 99% of mobile phones on the market. Compared with other products without a charge recogn...

SKU: EC-ACS33721L | Brand: Elecrow

You may need this item if you want to power your Arduino with a 3.7V LiPo battery to make it become a portable device. It made up of a “power cell” and “fuel gauge”, it allows you to connect a 3.7V single cell Lithium...

SKU: EF-EF03061 | Brand: ElecFreaks

This is a DC to DC step-down module based on LM2596 3A Step-Down Voltage Regulator. The LM2596 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down(buck) swi...