Power Supplies

SKU: AF-4711 | Brand: Adafruit

The AP3429A Buck Converter Breakout steps down 3.4–5.5V input to a stable 3.3V output at up to 1.2A, with 90–95% efficiency. It's ideal for powering 3.3V circuits from LiPo batteries, 3× alkaline cells, or USB power s...

SKU: TB-MP3312 | Brand: Little Bird

This 12W switchmode plug pack features manually selectable voltage output (3V, 5V, 6V, 7.5V, 9V, or 12V DC) at up to 1000 mA, plus a built-in USB-A output socket for charging or powering USB devices. It comes with 7 i...

SKU: DF-DFR0568 | Brand: DFRobot

This compact DC-DC buck-boost converter automatically steps voltage up or down to deliver a stable 3.3 V output from a wide 2.5–15 V input range. With a maximum output current of 600 mA and ultra-low 180 µA quiescent ...

SKU: SS-106990021 | Brand: Seeed Studio

The 5V/3.3V Breadboard Power Supply plugs directly into a standard breadboard and provides regulated 5V or 3.3V power to both rails. It accepts power via either a 7–15V DC barrel jack or a 5V Micro-USB input, giving y...

SKU: SF-PRT-13032 | Brand: SparkFun

A simple breadboard power supply that takes a 6–12 V input and outputs a regulated 5 V or 3.3 V. All headers are at 0.1" pitch for direct insertion into a standard breadboard, with the output pins spaced to power both...

SKU: DF-FIT0471 | Brand: DFRobot

INTRODUCTION This is a small DC - DC boost module that converts a 0.9 ~ 5v power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small ...

SKU: AF-4552 | Brand: Adafruit

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter...

SKU: DF-DFR0494 | Brand: DFRobot

An uninterruptible power supply HAT for Raspberry Pi that provides steady power during outages, protecting your system from damage and ensuring safe shutdown. Ideal for mobile applications like Raspberry Pi cameras, t...

SKU: PR-PIM086 | Brand: Little Bird

A laser-cut acrylic base plate that replaces the bottom layer of a Pibow case, adding a secure mounting area for breadboard prototyping alongside your Raspberry Pi. Compatible with Raspberry Pi 3, A+, Zero, and Zero W...

SKU: TB-MP3144 | Brand: Little Bird

An ultra-slim switchmode power adaptor that delivers 5V DC at 1A through a compact, lightweight design. Slim enough to sit side by side on a power board without blocking adjacent outlets. Features built-in EMI filter...

SKU: AF-1459 | Brand: Adafruit

This inductive charging set provides wireless power transfer using a split-transformer design. The transmitter coil is powered with 9–12 V DC, and the receiver coil outputs 3.3 V DC — no direct wire connection between...

SKU: PL-2833 | Brand: Pololu

The compact (0.5″ × 0.7″) D24V10F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 1 A....

SKU: TB-MP3147 | Brand: Little Bird

This ultra-slim switchmode plug pack delivers 12V DC at 400 mA (4.8W) from a standard Australian/NZ mains outlet. Its slim profile allows multiple adaptors to sit side by side on a power board without blocking adjacen...

SKU: AF-3238 | Brand: Adafruit

This IEEE 802.3af PoE splitter separates power and data from a single PoE Ethernet cable, providing regulated 12VDC at up to 1A on a standard 2.1 mm DC barrel jack alongside a standard Ethernet data connection. It let...

SKU: SF-PRT-10287 | Brand: SparkFun

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack...

SKU: SF-PRT-10255 | Brand: SparkFun

The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery, has solder jumper selectable 5V and 3.3V output, and an under voltage protection...

SKU: PL-2884 | Brand: Pololu

The Pololu D24V150F9 is a high-current synchronous step-down (buck) voltage regulator that converts input voltages up to 40V down to a fixed 9V output. With up to 15 A available output current and typical efficiencies...

SKU: SS-110990161 | Brand: Seeed Studio

A handy assortment of six power connector adaptors and converters for prototyping, electronics projects, and bench setups. This pack covers the most common power connector types — barrel jack, BNC, JST, and screw term...

SKU: TB-MP3480 | Brand: Little Bird

The Jaycar MP-3480 is a compact, regulated 5VDC 3A switchmode plug pack with a slim profile designed to fit side-by-side on a powerboard. It accepts 100–240VAC 50/60Hz input (AU/NZ 2-pin plug) and comes with 7 interch...

SKU: SF-TOL-14100 | Brand: SparkFun

This is the big kahuna from Mean Well, a 350W single output switching power supply. This power supply is extremely reliable and beefy, able to output 24VDC at 14.6A. If you’ve been looking for a powerful power supply ...