Physical Buttons & Switches

SKU: AF-1684 | Brand: Adafruit

Push once to turn one side on, push again to turn off, push again to turn the other side on, one last push and its off again! It's basically a push-button toggle switch that connects and disconnects the middle pin fro...

SKU: SF-COM-11973 | Brand: SparkFun

This heavy-duty 16 mm metal pushbutton features a latching (on/off) mechanism with an illuminated green LED ring. Built from stainless steel with an IP65 weatherproof rating, it is designed for panel-mount application...

SKU: SF-COM-11969 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated yellow LED ring. It is a SPDT with 16mm threa...

SKU: AF-173 | Brand: Adafruit

The "poor man's" accelerometer! Tilt sensors are switches that can detect basic motion/orientation. The metal tube has a little metal ball that rolls around in it, when its tilted upright, the ball rolls onto the cont...

SKU: SF-COM-13639 | Brand: SparkFun

A pack of two SPDT mini microswitches with a small push-button actuator. These 3-terminal switches have a tactile click and are commonly used as limit switches in 3D printers, sliders, and robot projects. Specificati...

SKU: SF-DEV-13210 | Brand: SparkFun

This is the RGB/Button Shield for RFduino, a small add-on board for the RFduino DIP module. Just as its name suggests, this little board is equipped with two pushbuttons and an RGB LED. This shield can be easily at...

SKU: AF-2925 | Brand: Adafruit

When you need a lot of options, you need a Mini 8-Way Rotary Selector Switch. This is basically a single-pole to 8-throw switch. As you rotate the knob around, the middle pin will make contact with each of the oute...

SKU: AF-423 | Brand: Adafruit

Your friends probably tell you that you are "good with your hands," but now you can also be good with your feet! This foot switch is made of rubbery plastic, is plenty strong to put up with any amount of stomping, and...

SKU: AF-475 | Brand: Adafruit

This 30mm translucent green arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no ...

SKU: AF-3347 | Brand: Adafruit

A pack of 10 tactile push buttons with a polished metal ball actuator, giving them a distinctive industrial look. The rounded top also makes them forgiving when pressed at an angle — useful for mechanical actuator set...

SKU: DF-FIT0455-G | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: AF-1824 | Brand: Adafruit

This phone-style 3×4 matrix keypad features 12 buttons (0–9, *, #) with telephone-layout lettering printed on the keys. It uses a matrix scanning arrangement requiring only 7 microcontroller pins (3 columns + 4 rows) ...

SKU: DF-DFR0423 | Brand: DFRobot

INTRODUCTION This module is a self-locking switch. Press the button to turn it to the "on" state and press it again to turn it to the "off" state. The board has immersion gold plating and...

SKU: SF-PRT-26851 | Brand: SparkFun

Add five-way navigation input to an I2C project without building a button matrix from scratch. Press up, down, left, right or centre on the low-profile directional pad to send button input to your microcontroller.The ...

SKU: DF-DFR0785-W | Brand: DFRobot

This Gravity LED button is a simple illuminated push button with a transparent cap, designed for interactive Arduino and micro:bit projects. When the button is pressed, the internal white LED turns on to provide clear...

SKU: DF-DFR0785-Y | Brand: DFRobot

This LED-illuminated button module is a simple digital switch with a transparent cap and a yellow light. It works like a basic button, but the internal LED turns on while the button is pressed, giving clear visual fee...

SKU: DF-DFR0785-R | Brand: DFRobot

This compact illuminated push-button module is designed for interactive electronics and quick prototyping. A transparent cap sits over an internal red LED, giving instant visual feedback when the button is pressed.The...

SKU: DF-DFR0785-G | Brand: DFRobot

This compact illuminated push-button module adds a simple, visible input to interactive electronics, classroom prototypes and maker projects. A transparent cap shows the integrated LED, which lights as soon as the but...

SKU: DF-DFR0789-G | Brand: DFRobot

This compact illuminated push-button module combines a tactile switch with a built-in green LED indicator, making it handy for interactive electronics, control panels and classroom builds.It uses a self-locking toggle...

SKU: DF-DFR0789-R | Brand: DFRobot

This illuminated pushbutton module is a simple self-locking switch with a built-in red LED for clear visual feedback. Press it once and the module outputs High while the LED turns on; press it again and the output goe...