Motors (DC, stepper, servo)

SKU: DF-SER0064 | Brand: DFRobot

##Introduction This is an exceptional water-resistant digital servo with impressive torque. It boasts a torque capacity of 35kg and a controllable angle of 180 degrees. It exhibits superior linear motion and features ...

SKU: AF-6120 | Brand: Adafruit

A 70mm USB-powered cooling fan that delivers reliable airflow for electronics projects. Simply plug into any USB port for immediate cooling — no drivers or setup required. The USB connector can be cut off to wire the...

SKU: AF-6105 | Brand: Adafruit

This compact 3cm USB-powered cooling fan provides instant airflow to prevent electronics from overheating. Simply plug it into any USB port for immediate cooling, or cut off the USB connector to wire it directly to a ...

SKU: AF-6101 | Brand: Adafruit

This 4cm USB-powered cooling fan provides instant airflow to prevent electronics from overheating. Simply plug it into any USB port for immediate cooling, or cut off the USB connector to wire it directly to a 5V power...

SKU: WS-28626 | Brand: Waveshare

Enhance Your Robotics with the Innovative DDSM400 Direct Drive Servo Motor – Precision, Power, and VersatilityElevate your robotics projects with the DDSM400 Direct Drive Servo Motor, a marvel of engineering designed ...

SKU: DF-FIT1001 | Brand: DFRobot

A compact direct-drive servo motor integrating a brushless outer-rotor motor, encoder, and servo driver into a single unit. By eliminating the traditional gearbox/reducer, it delivers smooth torque, low noise, and lon...

SKU: SF-ROB-25167 | Brand: SparkFun

The SparkFun Mini Stepper Motor Driver empowers you to control bipolar stepper motors with ease and precision. This compact driver, measuring just 0.6in. by 0.8in. with breadboard-friendly 0.1in. pin spacing, shines i...

SKU: AF-5857 | Brand: Adafruit

These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90, about double the 'sta...

SKU: SF-ROB-24053 | Brand: SparkFun

These DG01D-E hobby motors come as a matched pair, each with a built-in hall effect speed encoder and a 1:48 plastic gearbox. The hall sensor detects the magnetic plate's polarity — south pole outputs high, north pole...

SKU: SF-ROB-24052 | Brand: SparkFun

Here is a simple, low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V). This small servo comes with a stand...

SKU: SF-ROB-17754 | Brand: SparkFun

This 12V brushed DC gearmotor features a 9.68:1 metal spur gearbox and an integrated 48 CPR quadrature encoder on the motor shaft, providing 464.64 counts per revolution of the gearbox output. The two-channel Hall eff...

SKU: SF-ROB-20441 | Brand: SparkFun

A 3-phase DC brushless DC motor has the unique capability of being both a high efficiency, high torque, very smooth motor, as well as the starting point for haptic feedback when combined with the appropriate sensor an...

SKU: DF-SER0059 | Brand: DFRobot

A miniature serial bus servo from DFRobot that delivers 2.3 kg·cm of stall torque at 6 V, controllable via TTL serial communication. Up to 253 servos can be daisy-chained in series, each assigned a unique ID for indiv...

SKU: DF-FIT0796 | Brand: DFRobot

A pack of four coreless micro motors sized 8.5×20mm, designed for DIY drone builds and lightweight RC projects. These high-speed motors deliver 46,000 RPM from a compact form factor, making them well-suited for quadco...

SKU: AF-4638 | Brand: Adafruit

This N20 micro geared DC motor includes a built-in magnetic encoder wheel and two Hall effect sensors, providing speed and direction feedback without additional wiring. The compact N20 form factor makes it well suited...

SKU: SF-ROB-18648 | Brand: SparkFun

The Arducam Upgraded Camera Pan Tilt Platform provides a lightweight, sturdy two-axis mount for cameras commonly used with Arduino and Raspberry Pi. Two digital servos deliver smooth pan and tilt movement, while an in...

SKU: DF-FIT0708 | Brand: DFRobot

A compact 10 mm micro stepper motor with 18° per step, designed for direct connection to microcontrollers like Arduino and ESP32 without requiring a dedicated driver board. The 2-phase 4-wire bipolar configuration mak...

SKU: DF-SER0053 | Brand: DFRobot

A 9g micro servo with 300° rotation and a built-in clutch mechanism that protects the servo from damage when external forces are applied. If the servo angle is changed by an external force during operation, the clutch...

SKU: DF-SER0050 | Brand: DFRobot

The DFRobot 2Kg 180° Clutch Servo features built-in clutch protection and electronic overload protection, making it ideal for robotics and model applications where servos may encounter external forces or stalling. Wh...

SKU: AF-4699 | Brand: Adafruit

A simple DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 500mA, making it easy to run from the same supply as your DC motors or servos. The pump suc...