Enclosures & Hardware

SKU: SF-PRT-26986 | Brand: SparkFun

This round steel SMT spacer provides an internal M2.5 thread for creating a compact threaded mounting point directly on a PCB or assembly.It is reflow compatible, so it can be placed during surface-mount assembly and ...

SKU: SF-PRT-26988 | Brand: SparkFun

This is a short piece of spring steel music wire that can be bent to the shape you need for small mechanisms, linkages, prototypes or craft builds.Each unit is supplied as an individual 6 inch length with a fine 0.025...

SKU: SF-PRT-28866 | Brand: SparkFun

This mounting arm provides a stable platform for securing an anemometer and wind vane as part of a weather station setup. It is the same style of arm included with the SparkFun Weather Meter Kit.Designed for straightf...

SKU: SF-PRT-25233 | Brand: SparkFun

This basic handheld enclosure is designed for building a comfortable, portable electronics project housing. Its rounded, ergonomic shape makes it suitable for instruments, controllers, sensor packs or other devices th...

SKU: SF-PRT-25464 | Brand: SparkFun

This threaded hex standoff is a simple hardware spacer for mounting circuit boards, panels and small electronics assemblies.It is 0.750 in (19.05 mm) long between boards and tapped for a #4-40 screw, making it useful ...

SKU: SF-PRT-28007 | Brand: SparkFun

Add a bit of protection and a cleaner finish to your Alchitry board with this standoff hardware. It is designed for use with compatible Alchitry boards, helping lift the PCB off your work surface or enclosure base.The...

SKU: SF-PRT-28005 | Brand: SparkFun

This spacer board gives your FPGA stack a little extra breathing room. It adds 5.6mm of space between stacked boards, helping make room for the included heatsink.It is also handy when you need clearance for cables bet...

SKU: SF-PRT-28863 | Brand: SparkFun

This simple pair of screw clamps is handy for securing parts of your project during mounting, helping keep cables or assemblies neatly held in place.They are the same style of clamps supplied with the Weather Meter Ki...

SKU: SF-PRT-28765 | Brand: SparkFun

This aluminium hex standoff is a compact threaded spacer for stacking and mounting small boards. It is 16.0mm long, measures 4.5mm across the flats, and is tapped through for an M2.5-0.45 screw.It is well suited to mo...

SKU: SF-PRT-28864 | Brand: SparkFun

This two-piece metal mast set provides a sturdy and convenient mounting solution for your project.It is the same reliable mast included with SparkFun’s Weather Meter Kit, making it a handy replacement or spare when yo...

SKU: SF-PRT-28865 | Brand: SparkFun

This mounting arm provides a stable platform for securing a rain gauge in a weather monitoring setup. It is the same arm supplied with SparkFun's Weather Meter Kit, making it useful as a replacement or spare for compa...

SKU: SF-TOL-18471 | Brand: SparkFun

These metric threaded inserts are handy for creating strong, reusable fixing points in jigs, fixtures, wasteboards and other work-holding setups.Install a few in strategic locations to clamp down material, or set them...

SKU: SF-TOL-18472 | Brand: SparkFun

These threaded inserts are a handy way to add strong, reusable fixing points to a jig, fixture or machine wasteboard. Place a few exactly where you need hold-down points, or install them in a grid pattern to turn a wa...

SKU: SF-KIT-24115 | Brand: SparkFun

Keep your electronics bench ready for the next enclosure, PCB stack or prototype with this 210-piece brass standoff kit. It covers two common PCB hardware sizes, M3 and M2.5, with a mix of standoff heights, nuts, scre...

SKU: SF-PRT-10316 | Brand: SparkFun

This nylon standoff is a simple hardware spacer for lifting a PCB off the bench or mounting a board neatly inside an enclosure.It is 3/8" long and tapped for a 4-40 screw, making it handy for projects that use common ...

SKU: SF-PRT-26989 | Brand: SparkFun

This nylon standoff is a simple hardware spacer for raising a PCB off a surface or mounting it neatly inside an enclosure. It is tapped for a 4-40 screw and measures 3/4" long.Use it to give your board clearance from ...

SKU: AF-6044 | Brand: Adafruit

Add motion to LEGO-compatible brick builds without relying on hot glue, epoxy or guesswork. This resin-printed mounting piece is designed to hold Adafruit '9g' micro servos and micro-servo-sized DC motors securely for...

SKU: AF-6360 | Brand: Adafruit

This SmartiPi Touch Pro 3 enclosure is designed for the Raspberry Pi Touch Display 2, giving your touchscreen project a tidy, mountable case with room inside for extra hardware. It is compatible with Raspberry Pi 3, 4...