Enclosures & Hardware
Browse our range of enclosures and mounting hardware for your electronics projects. From project boxes and cases to standoff kits, screws, nuts, and mechanical fixings in nylon and brass — we stock the parts you need to securely house and mount your builds.
Ideal for makers, hobbyists, STEM educators, and professionals across Australia. Whether you're assembling a Raspberry Pi enclosure or mounting PCBs, you'll find the right hardware here with fast Australian shipping.
Black Nylon Screw and Stand-off Set – M2.5 Thread
SKU: AF-3299 | Brand: Adafruit
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the...
Delivered by Mon 15 Jun
Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs
SKU: AF-5774 | Brand: Adafruit
The Adafruit Swirly Aluminum Mounting Grid provides a mechanical substrate for mounting small microcontroller boards, sensors, and Feathers that use STEMMA QT plug-and-play connections. When you're snapping boards tog...
Delivered by Mon 15 Jun
White Nylon Screw and Stand-off Set – M2.5 Thread
SKU: AF-3658 | Brand: Adafruit
A comprehensive 420-piece white nylon screw and standoff set in M2.5 thread — the standard mounting size for most breakout boards, development boards, and single-board computers including Raspberry Pi, Feather, and si...
Delivered by Fri 3 Jul
Snap-on Enclosure for Adafruit Feather RP2040 USB Host
SKU: AF-6057 | Brand: Adafruit
Delivered by Fri 3 Jul
Snap-on Enclosure for Adafruit Feather RP2040 DVI
SKU: AF-6241 | Brand: Adafruit
A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer ...
Delivered by Fri 3 Jul
Adafruit Feather Mount for LEGO-Compatible Brick Systems
SKU: AF-6054 | Brand: Adafruit
The Feather Mount for LEGO-Compatible Brick Systems lets you securely attach any standard-sized Feather or FeatherWing board (2" × 0.9" / 51 mm × 23 mm) to LEGO-compatible brick plates. No hot glue, epoxy, or tape nee...
Delivered by Fri 3 Jul
Adafruit 8x8 Trellis Feather M4 Acrylic Enclosure + Hardware Kit
SKU: AF-4372 | Brand: Adafruit
This laser-cut acrylic enclosure kit turns your 8×8 NeoTrellis setup (four 4×4 NeoTrellis boards) into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to...
Delivered by Fri 3 Jul
Adafruit 4x4 Trellis Feather Acrylic Enclosure + Hardware Kit
SKU: AF-4339 | Brand: Adafruit
This laser-cut acrylic enclosure kit turns your 4×4 NeoTrellis setup into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather b...
Delivered by Fri 3 Jul
Bolt-On Kit for Circuit Playground, micro:bit, Flora or Gemma
SKU: AF-4103 | Brand: Adafruit
A simple, solder-free way to make secure wire connections to development boards with large alligator-clip pads. Thread a screw through the pad, wrap your wire around it, and tighten the hex nut to hold everything firm...
Delivered by Fri 3 Jul
Adafruit Swirly Aluminium Mounting Grid for 0.1in PCBs
SKU: AF-5779 | Brand: Adafruit
This swirly aluminium mounting grid gives small maker boards a sturdy mechanical base when you are building plug-and-play projects with STEMMA QT boards, sensors, Feathers and other 0.1 inch-spaced PCBs.It is made usi...
Delivered by Fri 3 Jul
Adafruit Feather RP2350 HSTX Enclosure
SKU: AF-6305 | Brand: Adafruit
Keep your Adafruit Feather RP2350 with HSTX Port protected during use and transport with this cute, minimal enclosure. It has been custom-designed to fit the Feather RP2350 HSTX board, including the version with 8MB o...
Delivered by Fri 3 Jul
