Batteries (LiPo, NiMH, coin cell)

SKU: AF-4193 | Brand: Adafruit

A slim 2×AA battery holder with a built-in on/off switch and genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and p...

SKU: AF-1131 | Brand: Adafruit

A 500 mm extension cable with a JST-PH 2-pin socket on one end and a matching plug on the other. The colour-coded wires make it easy to verify correct polarity. Compatible with JST-PH terminated battery packs includin...

SKU: SF-PRT-10218 | Brand: SparkFun

A standard 9V alkaline battery (Rayovac). Suitable for powering Arduino boards, breadboard projects, and other electronics — use with a voltage regulator to get a stable 5V output. Key Features 9V Alkaline – Standa...

SKU: AF-4779 | Brand: Adafruit

This compact battery holder connects 3× AA batteries in series, providing 3.3–4.5V output — a similar range to lithium-ion/polymer batteries. It features a built-in on/off switch and a genuine JST-PH 2-pin connector w...

SKU: DF-FIT0079 | Brand: DFRobot

A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...

SKU: DF-FIT0043 | Brand: DFRobot

The second version of the 9V to Barrel Jack Adapter, now featuring a hard plastic battery snap for easier connection and disconnection. Plug a 9V battery into one end and connect the other to any device with a 5.5 × 2...

SKU: DF-DFR0208 | Brand: DFRobot

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour. It is designed to charge single-cel...

SKU: SF-PRT-00552 | Brand: SparkFun

Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration.

SKU: SF-PRT-10891 | Brand: SparkFun

This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...

SKU: AF-875 | Brand: Adafruit

This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. U...

SKU: LB-LS4126-LS1558 | Brand: Little Bird

FeaturesIndependent Charging: Each of the four slots operates independently, allowing simultaneous charging of different battery sizes or charge levels.LED Indicator Lights: Red – Charging Green – Fully Charged S...

SKU: DF-FIT0362 | Brand: DFRobot

This battery holder can hold 3 AA batteries which provides 3.6V rechargeable battery pack with NiMH / NiCd cells or 4.5V battery pack with Alkaline cells. You will be able to power your Arduino with this battery hold...

SKU: SF-PRT-09518 | Brand: SparkFun

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack on the other end. Plug it onto a standard 9V battery and connect directly to any device with an onboard barrel jack — perfect for powering...

SKU: DF-FIT0918 | Brand: DFRobot

A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...

SKU: DF-FIT0131 | Brand: DFRobot

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack. Plug a 9V battery into one end and connect the other to any device with an onboard barrel jack — ideal for powering Arduinos, development...

SKU: AF-1905 | Brand: Adafruit

The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your batt...

SKU: SF-PRT-18769 | Brand: SparkFun

This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover as well as an ON/OFF switch that can be used to control power to your project. The ...

SKU: DF-FIT0626 | Brand: DFRobot

This battery holder connects 3× AAA batteries in series, providing approximately 4.5V from alkaline cells. It features a PH2.0-2P connector, making it compatible with DFRobot boards and other devices that use the PH2....

SKU: DF-FIT0611 | Brand: DFRobot

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen....

SKU: AF-4194 | Brand: Adafruit

A slim, open-top 2×AA battery holder with a genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, Adafruit boards, and microcontrollers wi...