Batteries (LiPo, NiMH, coin cell)
Shop batteries for your electronics projects, from lithium polymer (LiPo) and 18650 li-ion cells to NiMH rechargeables, coin cells, and everyday alkaline batteries. We also stock battery holders, breakout boards, and chargers to keep everything powered up.
Whether you're building robots, portable gadgets, or STEM classroom kits, you'll find the right battery chemistry and form factor here. Available for fast shipping across Australia.
4xAA battery holder (square with cover)
SKU: DF-FIT0080 | Brand: DFRobot
A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...
Delivered by Mon 15 Jun
4 x AA Battery Holder with On/Off Switch
SKU: AF-830 | Brand: Adafruit
A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...
Delivered by Mon 15 Jun
4 x AA Battery Holder with Premium Jumper Header Wires
SKU: AF-3859 | Brand: Adafruit
A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with porta...
Delivered by Mon 15 Jun
4xAA Battery Holder with DC connector
SKU: LB-LR0309-16 | Brand: Little Bird
A flat 4×AA battery holder with a 2.1mm DC barrel jack connector, providing an easy way to power Arduino boards and other projects that accept a DC barrel plug. With four alkaline AA batteries installed, it delivers a...
Delivered by Mon 15 Jun
4xAA battery holder (square)
SKU: DF-FIT0079 | Brand: DFRobot
A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...
Delivered by Mon 15 Jun
4-AAA Battery Holder
SKU: PL-1145 | Brand: Pololu
This battery holder accommodates 4× AAA batteries in series, providing approximately 6V from alkaline cells or 4.8V from NiMH rechargeables. It features wire leads for connecting to your electronics projects. Key Fea...
Delivered by Mon 15 Jun
4x AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)
SKU: DF-FIT0918 | Brand: DFRobot
A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...
Delivered by Mon 15 Jun
4xAA Press-Stud Battery Holder - Default
SKU: PI-COM1304 | Brand: Pimoroni
A 4×AA battery holder with press-stud (snap) termination, providing a portable power source for wearable and on-the-go projects. With four alkaline AA batteries, it delivers approximately 6V with 7,000–10,000 mAh of c...
Delivered by Mon 15 Jun
4 x AA Battery Holder with 2.1mm Plug and On/Off Switch
SKU: AF-3788 | Brand: Adafruit
A 4×AA battery holder with a built-in on/off switch and a 13cm (5″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides convenient portable power with easy switching for development boards and ...
Delivered by Fri 3 Jul
4 x AA Battery Holder with 2.1mm Plug
SKU: AF-3784 | Brand: Adafruit
A 4×AA battery holder with a 20cm (8″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides a portable power source for development boards and projects that accept a standard DC barrel jack inpu...
Out of stock
2x2 AA Battery Holder with Premium Jumper Header Wires
SKU: AF-3905 | Brand: Adafruit
This compact 2×2 AA battery holder connects four AA batteries in series, providing a nominal 6 V DC output (alkaline) or 4.8 V DC (rechargeable NiMH). The premium jumper header wires plug directly into a breadboard — ...
Out of stock
