Batteries (LiPo, NiMH, coin cell)

SKU: LB-00237 | Brand: Little Bird

A compact 3.7 V 600 mAh lithium-ion polymer (LiPo) battery with a genuine 2-pin JST-PH connector. The battery includes built-in protection circuitry against overcharge, over-discharge (cuts off at 3.0 V), and short ci...

SKU: AF-2011 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2000mAh. If you need a larg...

SKU: AF-1578 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about...

SKU: AF-3898 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 400mAh for a total of about...

SKU: AF-4236 | Brand: Adafruit

A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. ...

SKU: AF-4237 | Brand: Adafruit

A compact 3.7 V 350 mAh lithium-ion polymer (LiPo) battery with a short cable and genuine 2-pin JST-PH connector. The slim, lightweight form factor makes it ideal for wearables, IoT devices, and portable electronics p...

SKU: AF-2750 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 350mAh for a total of about...

SKU: DF-FIT0611 | Brand: DFRobot

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen....

SKU: SF-PRT-10592 | Brand: SparkFun

This is the SMD version of PRT-07948, which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the batte...

SKU: TB-SB1770 | Brand: Little Bird

These high capacity batteries are used in many desktop and notebook computers to retain date, time and configuration information while the computer is switched off. They are also useful where long shelf life is impor...

SKU: AF-2849 | Brand: Adafruit

This is a handy little non-rechargeable CR2016 Lithium Coin Cell Battery!Sitting at 20mm diameter and is 1.6mm thick it's small but packs a punch with a nominal voltage output of 3V and a capacity of 90mAh. For other ...

SKU: AF-2850 | Brand: Adafruit

The CR2450 is a high-capacity 3V lithium coin cell battery, ideal for powering microcontroller projects, sensors, key fobs, and other small electronics that need reliable, long-lasting power. With a generous 610mAh c...

SKU: SF-PRT-07948 | Brand: SparkFun

A through-hole 12mm coin cell battery holder for PCB mounting. Uses friction to hold the battery securely in place — the metal housing is positive (+) and the PCB pad underneath is negative (−). Commonly used for RTC ...

SKU: SF-PRT-13855 | Brand: SparkFun

A slim, lightweight 3.7V 2000 mAh lithium-ion battery terminated with a standard 2-pin JST-PH connector (2 mm pin spacing). Built-in protection circuitry guards against overvoltage, overcurrent, and undervoltage condi...

SKU: M5-A014 | Brand: Little Bird

Description M5GO BOTTOM is apparently the bottom part of M5GO which is a upgrade of basic bottoms, with a larger battery, LOGO-compatilble holes, MICPHONE, LED Bar , two more GROVE PORT，and more. M5GO BOTTOM&n...

SKU: SF-PRT-11928 | Brand: SparkFun

The CR2025 is a 20mm lithium coin cell battery rated at 3V with a 165 mAh capacity. At just 2.5mm thick, it's 0.7mm thinner than the more common CR2032, making it ideal for applications where space is at a premium. A...

SKU: SF-PRT-13856 | Brand: SparkFun

If you need some juice, this 6Ah Lithium Ion Battery is for you. These are very compact batteries based on Lithium Ion chemistry. This is the highest energy density currently in production. Each cell outputs a nominal...

SKU: SF-PRT-13854 | Brand: SparkFun

These are very slim, extremely light weight batteries based on Lithium Ion chemistry. Each cell outputs a nominal 3.7V at 850mAh! Comes terminated with a standard 2-pin JST-PH connector - 2mm spacing between pins. The...

SKU: SF-PRT-13851 | Brand: SparkFun

This is a very small, extremely lightweight battery based on Lithium Ion chemistry, with the highest energy density currently in production. Each cell outputs a nominal 3.7V at 400mAh! Comes terminated with a standard...

SKU: SF-PRT-00337 | Brand: SparkFun

CR1225 lithium metal 3V 12mm 47mAh coin cell batteries. Perfect small battery for miniature sensor node applications. These batteries are sold in single units.