Batteries (LiPo, NiMH, coin cell)
Shop batteries for your electronics projects, from lithium polymer (LiPo) and 18650 li-ion cells to NiMH rechargeables, coin cells, and everyday alkaline batteries. We also stock battery holders, breakout boards, and chargers to keep everything powered up.
Whether you're building robots, portable gadgets, or STEM classroom kits, you'll find the right battery chemistry and form factor here. Available for fast shipping across Australia.
Coin Cell Battery Holder - 20mm (SMD)
SKU: SF-PRT-11892 | Brand: SparkFun
Now for all of your coin cell battery surface mount needs, the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connect...
Delivered by Wed 24 Jun
Sewable CR2032 Battery Holder
SKU: AF-653 | Brand: Adafruit
This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you c...
Delivered by Fri 3 Jul
20mm Coin Cell Breakout Board (CR2032)
SKU: AF-1870 | Brand: Adafruit
A simple sewable breakout board with a CR2032 coin cell battery holder pre-soldered on and 0.1" pitch breakout pins for easy connection. Ideal for powering very low-current projects or adding a battery backup circuit ...
Delivered by Fri 3 Jul
20mm Coin Cell Breakout w/On-Off Switch (CR2032)
SKU: AF-1871 | Brand: Adafruit
A sewable breakout board with a CR2032 coin cell battery holder, built-in on/off switch, and 0.1" pitch breakout pins. The board provides two ground pins, one switched power pin, and one always-on power pin — giving y...
Delivered by Fri 3 Jul
CR2032 Lithium Coin Cell Battery
SKU: AF-654 | Brand: Adafruit
A standard CR2032 lithium coin cell battery providing 3V nominal output. This non-rechargeable cell is widely used in electronics projects, wearables, and sewable circuits. Specifications Type – CR2032 lithium coin...
Delivered by Fri 3 Jul
2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch
SKU: AF-783 | Brand: Adafruit
A compact coin cell battery holder designed for small portable and wearable electronics projects. It holds two 20mm coin cells (CR2032 is the most common size) wired in series to provide 6V nominal output, with an on/...
Delivered by Fri 3 Jul
