Batteries (LiPo, NiMH, coin cell)

SKU: AF-653 | Brand: Adafruit

This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you c...

SKU: AF-1870 | Brand: Adafruit

A simple sewable breakout board with a CR2032 coin cell battery holder pre-soldered on and 0.1" pitch breakout pins for easy connection. Ideal for powering very low-current projects or adding a battery backup circuit ...

SKU: AF-1871 | Brand: Adafruit

A sewable breakout board with a CR2032 coin cell battery holder, built-in on/off switch, and 0.1" pitch breakout pins. The board provides two ground pins, one switched power pin, and one always-on power pin — giving y...

SKU: AF-654 | Brand: Adafruit

A standard CR2032 lithium coin cell battery providing 3V nominal output. This non-rechargeable cell is widely used in electronics projects, wearables, and sewable circuits. Specifications Type – CR2032 lithium coin...

SKU: AF-783 | Brand: Adafruit

A compact coin cell battery holder designed for small portable and wearable electronics projects. It holds two 20mm coin cells (CR2032 is the most common size) wired in series to provide 6V nominal output, with an on/...

SKU: LB-LR0347A | Brand: Little Bird

This E-Textiles  Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on ...

SKU: LB-00081 | Brand: Little Bird

A standard CR2032 3 V lithium coin cell battery. Commonly used in real-time clocks, key fobs, wearable electronics, LED throwies, and e-textile projects with LilyPad battery holders. Specifications Type – CR2032 li...

SKU: LB-BK-00081 | Brand: Little Bird

Running a Paper Circuits Class or need lots of batteries for E-Textiles and Wearables?  This is our best-priced Coin Cell Battery.CR2032 Button Cell Battery - Great for use with the Lilypad Switch Battery Holder....

SKU: LB-CR2032-SAFE | Brand: Little Bird

A child-safe, screw-closed battery enclosure for a single CR2032 coin cell, designed to meet ACCC button battery safety guidelines. The compartment requires a screwdriver to open, preventing young children from access...

SKU: LB-PAPER-SCREW | Brand: Little Bird

A child-safe battery holder designed for paper circuits in educational settings. Features a screw-secured enclosure for the CR2032 coin cell battery, meeting ACCC safety guidelines for button batteries used around chi...

SKU: LB-BK-SAFE | Brand: Little Bird

Paper circuits are a fantastic way to  teach the basics and fundamentals of creating an electric circuit without the need to solder or code a single thing!If you are unfamiliar, a paper circuit is a functioning e...

SKU: LB-SMILE | Brand: Little Bird

This is a simple coin cell battery holder that can enclose two CR2032 batteries inside itself, and safely kept closed via two phillips head screws. Each battery holder will run batteries in series, output up to 6V, an...

SKU: LB-BK-LR0347A | Brand: Little Bird

A sewable coin cell battery holder with built-in on/off slide switch, designed for e-textile and wearable electronics projects. This bulk 10-pack is ideal for classrooms, workshops, and makerspaces. Each holder accep...

SKU: PI-TEK001 | Brand: Pimoroni

A lightweight, sewable battery board that's great for paper and fabric engineering projects. Works with CR2032 coin cell batteries. The voltage (and hence current) supplied from LIR2032 rechargeable ...

SKU: PI-COM1900 | Brand: Pimoroni

A sewable coin cell battery holder designed for wearable electronics projects. The metal tabs have small 1mm holes that accommodate a #5 or smaller needle, making it easy to sew directly onto fabric with conductive th...

SKU: SF-PRT-00338 | Brand: SparkFun

CR2032 Lithium metal 3V 250mAh button cell battery. Great for powering low power processors or blink an LED for weeks at a time. Note: This item is non-returnable. If this item arrives damaged or is not functioning pr...