Arduino Power Supplies and Voltage Regulators

SKU: AF-4552 | Brand: Adafruit

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter...

SKU: AF-1351 | Brand: Adafruit

A simple 2-way DC barrel jack splitter that lets you power two devices from a single power adapter. Plug in one standard 5.5mm/2.1mm DC barrel jack and get two identical outputs — perfect for powering multiple boards ...

SKU: DF-DFR0105 | Brand: DFRobot

Most project of Arduino may need more than two voltage supply. When feed with from 4.5-35V, this arduino power shield able to provide a voltage range from 1.25-12V with 3A peak current. Ideal for servo control and ot...

SKU: PL-2833 | Brand: Pololu

The compact (0.5″ × 0.7″) D24V10F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 1 A....

SKU: DF-FIT0145 | Brand: DFRobot

A waterproof DC-DC step-down/step-up converter that accepts 8–40V DC input and delivers a stable 12V output at up to 6A (72W). Ideal for powering embedded PCs, single-board computers, and robot electronics from a wide...

SKU: SF-COM-11705 | Brand: SparkFun

We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable, but the whole point of using the barrel jacks was s...

SKU: SF-COM-11706 | Brand: SparkFun

Do you fear that your power may not be “far reaching” enough? How would another 3' work for you? Okay, so it doesn’t sound very dramatic, but sometimes an extra 3' of power cable is exactly what your project needs. Do...

SKU: SF-PRT-00091 | Brand: SparkFun

A classic 9V battery snap connector terminated with a 2-pin polarised Molex connector. Ideal for quick-connect battery power in breadboard and prototyping setups. Key Features Molex Terminated – 2-pin polarised con...

SKU: AF-276 | Brand: Adafruit

This FCC/CE certified and UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 2A (2,000mA) via a standard 5.5×2.1mm DC barrel jack. It accepts 110–240V AC input and is suitable for power...

SKU: SF-TOL-20680 | Brand: SparkFun

Keep an eye on your single-cell LiPo battery before your project suddenly runs out of power. This compact fuel gauge board sits in circuit with your battery and reports the relative state of charge using the MAX17043 ...

SKU: DF-FIT0625 | Brand: DFRobot

This compact battery holder is a handy portable power pack for small electronics and maker projects. It holds two AAA batteries and connects them in series, making it suitable for projects that need a simple removable...

SKU: SF-PRT-21297 | Brand: SparkFun

This compact regulator board makes it easy to power breadboard projects from a 6-12V supply. It provides a selectable regulated output of either 5V or 3.3V, making it handy for quick prototyping with common microcontr...

SKU: DF-FIT0538 | Brand: DFRobot

This battery holder takes two 18650 lithium cells and connects them internally in series for a standard 7.4 V output. It is a simple way to power electronics projects from common 18650 cells, such as those used in lap...

SKU: AF-5807 | Brand: Adafruit

This breakout is built around the HUSB238 USB PD sink chip, making it easy to negotiate power from a USB Type-C Power Delivery source without soldering tiny resistors. It plugs into a USB-C cable and uses the CC lines...

SKU: AF-3905 | Brand: Adafruit

This compact 2×2 AA battery holder connects four AA batteries in series, providing a nominal 6 V DC output (alkaline) or 4.8 V DC (rechargeable NiMH). The premium jumper header wires plug directly into a breadboard — ...

SKU: TB-ZV1634 | Brand: Little Bird

The MC78T12 is a positive linear voltage regulator in a TO-220 package, providing a fixed 12 V output at up to 3 A. It accepts an input voltage range of 12–35 V and includes built-in thermal overload and short-circuit...

SKU: AF-2850 | Brand: Adafruit

The CR2450 is a high-capacity 3V lithium coin cell battery, ideal for powering microcontroller projects, sensors, key fobs, and other small electronics that need reliable, long-lasting power. With a generous 610mAh c...

SKU: AF-63 | Brand: Adafruit

A compact 9V DC 1000mA regulated switching power adapter with a 5.5mm/2.1mm centre-positive barrel jack. The switching design keeps it small, lightweight, and efficient, while the regulated output delivers a steady 9V...

SKU: SF-PRT-13852 | Brand: SparkFun

This is an extremely tiny and light weight battery based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cells outputs a nominal 3.7V at 40mAh. This may sound...

SKU: SF-PRT-12748 | Brand: SparkFun

A standard SMD (surface-mount) DC barrel power jack for use with common DC wall adapters. This is the same connector size used on most Arduino boards and many other development platforms. Key Features Surface-Mount...