Skip to content

Lithium Ion Polymer Battery - 3.7v 600mAh

We have ✅ 183 available of the LB-00237 in our Sydney warehouse.

Express post delivery (2-5 business days)

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 600mAh for a total of about 1.9 Wh.

The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.

The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 150mA or less. Adafruit suggest Adafruit's Micro Lipo charger, which has a 100mA default rate. You can also set the Micro Lipo to 500mA rate for a faster charge.
Like most lipos, the batteries they sell do not have thermistors built in. This is why they suggest charging at 1 C or even less - 100 to 500mA is a good rate, and available from any USB port if using a USB-powered charger

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or possibility of short circuits. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.


Technical Details


  • Weight: 10.5g
  • Size: 29mm x 36mm x 5.5mm
  • Power Lead Length: 80mm
  • Output: 600mAh at 3.7V nominal


The Lithium Ion Polymer Battery - 3.7v 600mAh appears in the following collections:

SKU LB-00237

Customer Reviews

Based on 2 reviews
Clancy Duffy
Lithium Ion Polymer Battery - 3.7v 600mAh

I give the Lithium Ion Polymer Battery - 3.7v 600mAh a rating of 5 stars!

Aryna Chou
Lithium Ion Polymer Battery - 3.7v 600mAh

Perfect little battery for powering devices where space is limited, particularly if used with Arduino projects or prototyping. The battery capacity is 600mAh, and is great for devices with low consumption requirements, and compared to other battery chemistries, LiPo is by far better. The battery is packaged exceptionally, and overall quality is excellent. I would recommend, and purchase again.