Adafruit Sensors Accel, Gyro, and Magnetometers

Adafruit Precision NXP 9-DOF Breakout Board [FXOS8700 + FXAS21002] [AF-3463]

The NXP Precision 9DoF breakout combines two of the best motion sensors we've tested here at Adafruit: The FXOS8700 3-Axis accelerometer and magnetometer, and the FXAS21002 3-axis gyroscope.These two sensors combine to make a nice 9-Do...

Adafruit 9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS1 [AF-3387]

Get it by Thursday, Dec 21st

Add motion, direction and orientation sensing to your Arduino project with this all-in-one 9-DOF sensor. Inside the chip are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the E...

PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC [AF-3085]

The Prop Shield with Motion Sensors for Teensy 3.2 and Teensy-LC is meant for making interactive light and sound effects on small handheld props and wearable costumes! Good for all sorts of projects, and designed by the creator of the ...

Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g) [AF-2809]

Get it by Thursday, Dec 21st

The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer:• Three axis sensing, 10-bit precision• ±2g/±4g/±8g/±16g selectable scaling• Both I2C (2 pos...

Raspberry Pi Sense HAT [For the Pi 3 / 2 / B+ / A+] [AF-2738]

Get it by Thursday, Dec 21st

Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an ‘Astro Pi’. The Sense HA...

Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055 [AF-2472]

Get it by Tuesday, Dec 12th

If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope and magnetometer into actual "3D space orientation"! Orientation is a hard prob...

L3GD20H Triple-Axis Gyro Breakout Board - L3GD20/L3G4200 Upgrade [L3GD20H] [AF-1032]

Get it by Thursday, Dec 21st

A gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion capture and inertial measurement (that is - you can tell how an object is moving!) As thes...

FLORA 9-DOF Accelerometer/Gyroscope/Magnetometer - LSM9DS0 [v1.0] [AF-2020]

Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors. Inside are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the ...

Adafruit 9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS0 [AF-2021]

Add motion, direction and orientation sensing to your Arduino project with this all-in-one 9-DOF sensor. Inside the chip are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Ear...

Adafruit Triple-Axis Accelerometer - ±2/4/8g @ 14-bit - MMA8451 [AF-2019]

Get it by Thursday, Dec 21st

So many accelerometers and so little time! We've expanded our accelerometer selection even more with this high-precision and inexpensive MMA8451 Triple-Axis Accelerometer w/ 14-bit ADC. You can detect motion, tilt and basic orientation w...