Your Cart (0)

Sparkfun

Filter by:

 Sparkfun products range from things like resistors and LEDs to humidity sensors and LCD screens.  Including: Books, Cables, Cellular, Components, Development Tools, E-Textiles, GPS, Kits, LCDs, Programmers, Prototyping, Sensor, Tools, Robotics, Wireless

    Product Description Price Add to Cart
    Stepper Motor with Cable Stepper Motor with Cable  Stepper Motor with Cablesku: ROB-09238 This is a simple, but very powerful stepper motor with a 4-wire cable attached. Features:Step Angle (degrees) :1.82 PhaseRated Voltage : 12VRated Current : 0.33AHolding Torque : 2.3kg*cm5mm Diameter Drive ShaftDocuments:Datasheet $16.24
    Notify when back in stock.
    Servo - Small Servo - Small Here is a simple, low-cost, high quality servo for all your mechatronic needs. Small servo with a standard 3 pin power, control cable, and mounting hardware. This servo is very similar in size and specifications to the Hitec HS-55. Includes hardware as shown. Features: 3 pole ferrite, all nylon gear Top ball bearing Operating Voltage:... $8.95

    Ships in 24 hours
    Pan/Tilt Bracket Pan/Tilt Bracket Pan/Tilt Bracket sku: ROB-10335  This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We recommend our small servo motors listed below. Documents: Dimensional Drawing Assembly Guide Compatible Small Servo Motor ... $5.95
    Notify when back in stock.
    Servo - Medium Servo - Medium Servo - Medium sku: ROB-10333  Here is a simple, low-cost, high quality servo for all your mechatronic needs. Small servo with a standard 3 pin power, control cable, and mounting hardware. Features: Operating Voltage: 4.8V~6.0V Operating speed: 0.20sec/60 degree (4.8V) Operating speed: 0.18sec/60 degree (6V) ... $11.20

    Ships in 7 Days
    Servo - Medium Full Rotation Servo - Medium Full Rotation Here, for all your mechatronic needs, is a simple, high quality continuous full-rotation servo motor. A standard 3-pin power and control cable is attached and all hardware shown is included.Features:Continuous 360° rotationOperating voltage: 4.8-6.0VDCTop operating speed: 50-60RPM (4.8-6.0VDC respectively)Torque: 3.3-4.8 kg/cm (4.8-6.0VDC respec... $12.60

    Ships in 24 hours
    Servo - Large Full Rotation Servo - Large Full Rotation Here, for all your mechatronic needs, is a simple, high quality continuous full-rotation servo motor. A standard 3-pin power and control cable is attached and all hardware shown is included. Features: Continuous 360° rotation Rest point adjustment Operating voltage: 4.8-6.0VDC &#... $13.95

    Ships in 7 Days
    Vibration Motor Vibration Motor A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.6V operating range, these units shake crazily at 3V. Once anchored to a PCB or within a pocket, t... $4.95

    Ships in 7 Days
    Vacuum Pump - 12V Vacuum Pump - 12V Vacuum Pump - 12V sku: ROB-10398  This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our very own universal gripper using coffee grounds, balloon and some other parts. Features: 12V motor 12W operation 1/4" barbs 0-16"... $15.40

    Ships in 7 Days
    Small Stepper Motor Small Stepper Motor Small Stepper Motor sku: ROB-10551   These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Features: Stride Angle (degrees) : 7.5 2-Phase Rated Voltage : 12V Rated Current : 400mA 3mm Diameter Drive Shaft 4-Wire Cable Attach... $7.70

    Ships in 24 hours
    Stepper Motor - 68 oz.in (400 steps/rev) Stepper Motor - 68 oz.in (400 steps/rev) Stepper Motor - 68 oz.in (400 steps/rev) ROB-10846   These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Features: Step Angle (degrees) : 0.9 2-Phase Rated Voltage: 3V Rated Current: 1.7A/Phase 5mm Diameter Drive Shaft Holding Torque: 48N.cm N... $16.95

    Ships in 7 Days
    Universal Mounting Hub - 5mm Aluminum Universal Mounting Hub - 5mm Aluminum The universal aluminum mounting hub allows you to mount custom wheels and mechanisms to 5 mm motor shafts. The hubs are sold in pairs. The set includes one Allen wrench and two 4-40 set screws for securing the hubs to motor shafts. Documents: Dimensional Drawing $7.70

    Ships in 7 Days
    Servo - Large Servo - Large Servo - Largesku: ROB-09064Here is a simple, low-cost, high quality servo for all your mechatronic needs. Large servo with a standard 3 pin power and control cable. Includes hardware as shown.Features: 3 pole ferrite, all nylon gearTop ball bearingOperating Voltage: 4.8V~6.0VOperating speed: 0.20sec/60degree (4.8V)0.16sec/60degree (6.0V)Sta... $18.19
    Notify when back in stock.
    Stepper Motor - 125 oz.in (200 steps/rev) Stepper Motor - 125 oz.in (200 steps/rev) Stepper Motor - 125 oz.in (200 steps/rev) sku: ROB-10847   These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Note: This is a uni-polar stepper, meaning that if you are going to drive it with a bipolar stepper driver, you can ignore the yellow and white ... $23.95

    Ships in 7 Days
    Servo Extension Cable - Female to Female (shrouded) Servo Extension Cable - Female to Female (shrouded) This is a 12" servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics Z servos. Wire can also be used as a simple 0.1"... $2.95

    Ships in 7 Days
    Micro Metal Gearmotor 30:1 Micro Metal Gearmotor 30:1 This motor from Pololu has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6mm diameter, 0.35mm thread pitch), or you can use the mounting bracket or extended mounting bracket, which are specifically designe... $18.90
    Notify when back in stock.
    Solenoid - 36v Solenoid - 36v  Solenoid - 36vsku: ROB-10391 Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. According to the datasheet this solenoid is rated for 36V but they work like a charm at 12V. We've been controlling them with the Arduino Power Driver Shield, there's even some example code below. With a throw ... $14.95

    Ships in 7 Days
    Micro Metal Gearmotor Bracket Micro Metal Gearmotor Bracket This compact bracket from enables convenient mounting of popular, Sanyo-style miniature metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. #2-56×7/16" screws and nuts are included with the bracket. Note: Comes in quantiti... $4.90

    Ships in 24 hours
    Toy DC Motor with Leads Toy DC Motor with Leads This is a small toy DC motor with about 29.5mm long leads. It has a small circular shaft which measures about 2.8mm long. The motor has an operating voltage range of 1.5 to 4.5VDC and a no load speed of 23000 RPM (@4.5VDC, 70mA). More information is available in the spec sheet linked below. Documents: ... $1.05
    Notify when back in stock.
    Servo Cable - Female to Female Servo Cable - Female to Female This is a 12" servo cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Female connector on one end goes to controller and the female connector on the other mates with male pins commonly found on a controller board (such as a UAV controller or the ArduPilot). This cabl... $2.95

    Ships in 7 Days
    Miga Rotary 6P Miga Rotary 6P Nanomuscle is a shape memory alloy based rotary actuator. Rotation up to 60 degrees in either direction. Built-in digital controls and protection, simply apply 3-6V at 350mA and the rotary will turn. Documents: Datasheet Pin-Outs Driving NM70R-6P with MAD-V5 $10.50

    Ships in 24 hours
    Hobby Motor Hobby Motor Hobby Motor sku: ROB-10171  Here is a basic hobby motor. It works well for basic things like making a fan or spinning something very fast without much resistance. The motor has an operating voltage range of 1.5 to 4.5VDC and a no load speed of 12800 RPM (@4.5VDC, 320mA). More information is available in the spec sheet linked belo... $1.71
    Notify when back in stock.
    Rover 5 Motor Driver Board Rover 5 Motor Driver Board  Rover 5 Motor Driver Board ROB-11593 This motor driver board, originally designed by Dagu for their Rover 5 platform, is ideal for any small 4-wheel drive robotic vehicle. With four motor outputs, four encoder inputs and current sensing for each motor, it's a must-have when implementing omni or mechanum wheels.The motor drivers can be controlle... $24.95

    Ships in 7 Days
    Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft) Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft) Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft) sku: ROB-10848   These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations. These are a good choice for linear motion where precision and repea... $30.80

    Ships in 7 Days
    Micro Metal Gearmotor 100:1 Micro Metal Gearmotor 100:1 This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch), or you can use the mounting bracket or extended mounting bracket, which are specifically designed to securely mount t... $17.00

    Ships in 24 hours
    Micro Metal Gearmotor Bracket Extended Micro Metal Gearmotor Bracket Extended  This compact bracket enables convenient mounting of popular, Sanyo-style miniature metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This version has mounting tabs that allow for use with the Pololu Wheel 42x19mm. #2-56×7/16" screws and nuts are included wi... $4.90

    Ships in 24 hours
    Miga NanoMuscle Miga NanoMuscle Another great linear actuator from Miga Motors. The NM70 is a very small electric actuator that utilizes Shape Memory Alloy (SMA) with a 4.0mm stroke when exposed to 3.5V and 410mA. The amazing thing is this 1.1g device can move up to 70g! Documents: Datasheet Application note Miga Docum... $10.50

    Ships in 24 hours
    Servo - Generic High Torque (Standard Size) Servo - Generic High Torque (Standard Size) Servo - Generic High Torque (Standard Size)ROB-11965  Here is a powerful, low-cost, reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 83.47 oz-in. of maximum torque at 0.16 sec/60°This is a tough little servo with a standard 3 pin power and control cable, and all hardware listed below.Features:Volta... $12.95
    Notify when back in stock.
    Hobby Motor - Gear Hobby Motor - Gear Hobby Motor - GearROB-11696  This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much resistance.The motor has an operating voltage range of 1.0 to 3.0V DC and a no load speed of 6600±10% RPM (... $1.95
    Notify when back in stock.
    Servo - Hitec HS-422 (Standard Size) Servo - Hitec HS-422 (Standard Size) Servo - Hitec HS-422 (Standard Size)ROB-11884 This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 sec/60°, this is a simple servo for any beginner project!This high quality servo is perfect for your mechatronic needs and if you are looking to get into ... $13.93

    Ships in 24 hours
    Miga Rotary 2P Miga Rotary 2P Nanomuscle is a shape memory alloy based rotary actuator. Rotation up to 60 degrees in either direction. 2 pin version gives you direct on/off control. Simply apply 3-6V at 350mA and the rotary will turn. Documents: DatasheetMiga Documentation $10.50

    Ships in 7 Days
- Back to Top -