Your Cart (0)

Sparkfun

Filter by:

 Sparkfun products range from things like resistors and LEDs to humidity sensors and LCD screens.  Including: Books, Cables, Cellular, Components, Development Tools, E-Textiles, GPS, Kits, LCDs, Programmers, Prototyping, Sensor, Tools, Robotics, Wireless

    Product Description Price Add to Cart
    Standoff - Nylon (3/8", 4-40, 10 packs) Standoff - Nylon (3/8", 4-40, 10 packs) Standoff - Nylon (3/8", 4-40, 10 packs) sku: PRT-10927   These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold in packs of 10. Check below for matching screw... $2.95

    Ships in 24 hours
    Silicone Bumpers (set of 4) Silicone Bumpers (set of 4) Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. These are self-adhesive and 8mm in diameter and about 2mm tall. They come in a set of 4. $0.95

    Ships in 24 hours
    Screw - Phillips Head (1/4", 4-40, 10 pack) Screw - Phillips Head (1/4", 4-40, 10 pack) Screw - Phillips Head (1/4", 4-40, 10 pack) sku: PRT-10453  There are your standard Philips-head 4-40 screws. They are 1/4" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware. $1.50

    Ships in 3 to 7 days
    Standoffs Plastic - 3/4" (10 pack) Standoffs Plastic - 3/4" (10 pack) Standoffs Plastic - 3/4" (10 pack) sku: PRT-10462   These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. Sold in packs of 10. Check below for matching screws. $3.95

    Ships in 3 to 7 days
    Angle Bracket - 4-40 Angle Bracket - 4-40 These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 90 degree angles, mounting accelerometers, gryros, etc. They can also be used on the universal plate set for mounting all sorts of sensors and such. Sold as single units. Documents: ... $0.50

    Ships in 24 hours
    MakerBeam MakerBeam MakerBeam sku: PRT-10540  MakerBeam is a Mini-T open-source building system. Mini-T is a miniature version of T-slot (a technology that is widely used for industrial automation, robotics and machine enclosures.) Not only is it small enough to work as a model building system, but it's also precise and strong enough to build real ma... $154.00
    Notify when back in stock.
    Standoff - Metal (1", 4-40, 10 pack) Standoff - Metal (1", 4-40, 10 pack)  Standoff - Metal (1", 4-40, 10 pack)sku: PRT-10738  Metal long standoffs: 1" long x 1/4" OD. Used to get your proto board up off the table. #4-40 thread. Fits most development boards with available holes. Don't forget the screws, found below.Note: We are now selling these in packs of ten. The image shows four standoffs but you will receive ten.... $4.50

    Ships in 24 hours
    Standoff - Metal Hex (3/8", 4-40, 10 pack) Standoff - Metal Hex (3/8", 4-40, 10 pack) Standoff - Metal Hex (3/8", 4-40, 10 pack) PRT-10463   Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10 $3.95

    Ships in 3 to 7 days
    Nut - Metal (4-40, 10 pack) Nut - Metal (4-40, 10 pack) Nut - Metal (4-40, 10 pack) PRT-10454   We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and is hand picked only at the peak of the season. Or how they are expertly hand-ground by a 6th generation master grinder. And how every nut passes a rigorous 19-... $1.50

    Ships in 24 hours
    Standoffs Plastic 3/8" (10 pack) Standoffs Plastic 3/8" (10 pack) Standoffs Plastic 3/8" (10 pack) sku: PRT-10461   These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. Sold in packs of 10. Check below for matching screws. $2.95

    Ships in 3 to 7 days
    Silicone Bumpers - Large (10x16.5mm, 4 pack) Silicone Bumpers - Large (10x16.5mm, 4 pack) Silicone Bumpers - Large (10x16.5mm, 4 pack) sku: COM-10594  Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. These are self-adhesive and... $1.05

    Ships in 3 to 7 days
    Standoff - Metal (3/8", 4-40, 10 pack) Standoff - Metal (3/8", 4-40, 10 pack) Standoff - Metal (3/8", 4-40, 10 pack) sku: PRT-10739  Metal short standoffs: 3/8" long x 1/4"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don't forget the screws! Related below. Set of ten $2.95

    Ships in 3 to 7 days
    MicroRax - Medium Kit MicroRax - Medium Kit MicroRax - Medium Kit sku: PRT-10810  If you're in the market for a rigid prototyping system, MicroRAX may be just what you're looking for! MicroRAX is a miniature light-weight T-Slot style building system. Suitable for use on your desktop or bench top to build science, engineering, or advanced hobby and DIY projects. Micro... $302.50
    Notify when back in stock.
    MicroRax - Small Kit MicroRax - Small Kit DISCONTINUED - This page is for reference onlyMicroRax - Small Kitsku: PRT-10809 If you're in the market for a rigid prototyping system, MicroRAX may be just what you're looking for! MicroRAX is a miniature light-weight T-Slot style building system. Suitable for use on your desktop or bench top to build science, engineering, or advanced hobby an... $134.40

    Ships in 3 to 7 days
    Standoffs Plastic Short Standoffs Plastic Short Plastic short standoffs: 3/8" long x 1/4"OD Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don't forget the screws! Related below. Set of four $2.15
    Notify when back in stock.
    Machine Screw Nut 2-56 Machine Screw Nut 2-56 These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below.Sold in single units. $0.15

    Ships in 3 to 7 days
    Nut - Nylon (4-40, 10 pack) Nut - Nylon (4-40, 10 pack) Nut - Nylon (4-40, 10 pack) PRT-10789  Sometimes you need to fasten something down with a nut, but don't want to worry about shorting anything. A nylon nut can save you the hassle of shorting out the ground plane on a PCB without enough spacing around the mounting hole. Note: Sold in packs of ten. $1.95

    Ships in 24 hours
    Screw - Phillips Head (1/2", 4-40, 10 pack) Screw - Phillips Head (1/2", 4-40, 10 pack) Screw - Phillips Head (1/2", 4-40, 10 pack) PRT-10452   Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware. $1.50

    Ships in 3 to 7 days
    Screw - Phillips Head (1", 4-40, 10 pack) Screw - Phillips Head (1", 4-40, 10 pack) Screw - Phillips Head (1", 4-40, 10 pack) PRT-10450   Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware. $1.50

    Ships in 24 hours
    Machine Screw Nut - 4-40 Machine Screw Nut - 4-40 We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and is hand picked only at the peak of the season. Or how they are expertly hand-ground by a 6th generation master grinder. And how every nut passes a rigorous 19-point inspection process at each step of the process. And ... $0.15

    Ships in 3 to 7 days
    Screw - Phillips Head (3/4", 4-40, 10 pack) Screw - Phillips Head (3/4", 4-40, 10 pack) Screw - Phillips Head (3/4", 4-40, 10 pack) PRT-10451   Standard Philips-head 4-40 screws. They are 3/4" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware. $1.50

    Ships in 3 to 7 days
    Screws 4-40 Thread Screws 4-40 Thread Metal phillips head screws : 1/4" 4-40 thread. Fits all stand-offs and development boards with available holes. Set of four $1.05
    Notify when back in stock.
    Screw 2-56 Button Head - 3/8" Screw 2-56 Button Head - 3/8" These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 nut.Sold in single units. $0.15

    Ships in 24 hours
    Screw - Flat Head (1.25", 4-40, 10 packs) Screw - Flat Head (1.25", 4-40, 10 packs) Screw - Flat Head (1.25", 4-40, 10 packs)sku: PRT-10928   These are standard screws with 4-40 thread, but they're extraordinarily long - 1.25"! Sold in packs of 10. $1.50

    Ships in 3 to 7 days
    Standoffs Plastic Long Standoffs Plastic Long Plastic short standoffs: 3/4" long x 1/4"OD Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don't forget the screws! Related below. Set of four $2.15
    Notify when back in stock.
    Screw 2-56 Flat Head - 3/8" Screw 2-56 Flat Head - 3/8" These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 nut. Sold in single units. $0.15

    Ships in 3 to 7 days
    Screw 8-32 Button Head Black - 5/16" Screw 8-32 Button Head Black - 5/16" These are standard black button head screws 5/16"" long with 8-32 thread. Sold in single units. $0.08

    Ships in 3 to 7 days
    Nylon Nut - 4-40 Nylon Nut - 4-40 Sometimes you need to fasten something down with a nut, but don't want to worry about shorting anything. A nylon nut can save you the hassle of shorting out the ground plane on a PCB without enough spacing around the mounting hole. Sold as single units. $0.39
    Notify when back in stock.
    Nut - Nylon Locknut (4-40, 10 pack) Nut - Nylon Locknut (4-40, 10 pack) Nut - Nylon Locknut (4-40, 10 pack) PRT-10460  These are standard locknuts with 4-40 thread. For use with 4-40 machine screws. They have a nylon insert that allows them to stay tightly in place. Note: These come in packs of 10. $1.50

    Ships in 3 to 7 days
    Swage Stand-Off - 0.343" Swage Stand-Off - 0.343" 0.343" tall, brass swage attachable stand off. Non-threaded. $0.77
    Notify when back in stock.
- Back to Top -