Your Cart (0)

Sparkfun

Filter by:

 Sparkfun products range from things like resistors and LEDs to humidity sensors and LCD screens.  Including: Books, Cables, Cellular, Components, Development Tools, E-Textiles, GPS, Kits, LCDs, Programmers, Prototyping, Sensor, Tools, Robotics, Wireless

    Product Description Price Add to Cart
    JST Jumper 2 Wire Assembly JST Jumper 2 Wire Assembly This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST. Dimensions: 6" length Documents: JST connector Data... $0.95

    Ships in 7 Days
    Piezo Element Piezo Element Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer. Documents: Datasheet (7BB-20-6L0) Arduino Tutorial $1.50

    Ships in 7 Days
    Theragrip Thermal Tape Theragrip Thermal Tape Aavid Thermalloy Theragrip is a double sided tape for ceramic or metal heatsink packages. Theragrip provides both good thermal performance and excellent electrical isolation. Features: Double sided adhesive Great for attaching heat sinks Dimensions:  2 x 2" (50.8 x 50.8mm) $3.95

    Ships in 7 Days
    MegaBrite MegaBrite The MegaBrite is an upgraded version of the ShiftBrite. It uses the same A6281 controller chip with simple SPI daisy chained control, but uses five-chip 100mA wide angle red, green, and blue LEDs. The perceived output power of the red channel is less than the blue and green channels, but when mixed at maximum output, it appears white. Each... $12.58
    Notify when back in stock.
    Chameleon Enclosure - Black Chameleon Enclosure - Black Designed and built by ESawdust in Colorado, Chameleon 1 is an enclosure for popular development boards including Arduino and many Olimex dev boards like the AVR-P28. It also supports the XBee Regulated and FreeWave MegaMini RF modules. What makes the Chameleon so great is its universality, and its ruggedness. At only 9oz, it's surprisingly... $33.60

    Ships in 7 Days
    Nylon Standoff - 3/4" Nylon Standoff - 3/4" These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold as individuals. Check below for matching screws. $0.64
    Notify when back in stock.
    Nylon Standoff - 3/8" Nylon Standoff - 3/8" These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold as individuals. Check below for matching screws. $0.64
    Notify when back in stock.
    Solar Cell Huge - 5.2W Solar Cell Huge - 5.2W High quality, high output, full enclosed solar cell with barrel plug termination. This is a custom cell produced for SparkFun - not a small toy surplus item! This unit is rated for 8V open voltage and 650mA short circuit. We actually took a random unit outside and measured 9.55V open voltage and 550mA short circuit. Termination ... $49.00

    Ships in 7 Days
    TouchShield TouchShield Replacement: None. There is no direct replacement for this item. This page is for reference only. The TouchShield is a creative product from Liquidware. A touch-screen enabled OLED display is connected to a powerful ATmega to give the Arduino user full control of color images and animations. Compiling and uploading applications t... $153.95
    Notify when back in stock.
    Chameleon Faceplate - Blank Chameleon Faceplate - Blank This is a blank faceplate for the Chameleon 1 enclosure system for development boards Having blanks lets you drill or nip whatever face pattern you need for your development board or project. Documents: Drawings and Application Guide $4.13

    Ships in 7 Days
    Chameleon Faceplate - ET-AVR Chameleon Faceplate - ET-AVR This faceplate is a perfect fit for the ET-AVR development board and Chameleon 1 enclosure. With a Chameleon 1 enclosure, drill the designated hole patterns in the baseplate and your ET-AVR dev board will line up perfectly with this faceplate. No nipping, guessing - great, professional fit for the very capable ET-AVR system.Docum... $5.95

    Ships in 7 Days
    Chameleon Faceplate - FriendlyARM mini2440 Chameleon Faceplate - FriendlyARM mini2440 This faceplate is custom designed for the FriendlyARM mini2440 development board and Chameleon 1 enclosure. With a Chameleon 1 Basic enclosure, drill the designated hole patterns in the baseplate and your mini2440 board will line up perfectly with this faceplate. No nipping, guessing - great, professional fit for the mini2440.Doc... $3.25
    Notify when back in stock.
    Chameleon Faceplate - NGW100 Chameleon Faceplate - NGW100 This faceplate is a perfect fit for the Atmel NGW100 AVR32 development board and Chameleon 1 enclosure. With a Chameleon 1 enclosure, drill the designated hole patterns in the baseplate and your NGW100 will line up perfectly with this faceplate. No nipping, guessing - great, professional fit for a sweet Linux embedded system. ... $3.25
    Notify when back in stock.
    Chameleon Faceplate - Olimex P28 Chameleon Faceplate - Olimex P28 This faceplate is a perfect fit for the Olimex 20 or 28-pin AVR development board and Chameleon 1 enclosure.With a Chameleon 1 enclosure, drill the designated hole patterns in the baseplate and your Olimex AVR board will line up perfectly with this faceplate. No nipping, guessing - great, professional fit for the very capable 20- and 28-pin Olim... $5.95

    Ships in 7 Days
    Chameleon Faceplate - Olimex SAM7 P256 Chameleon Faceplate - Olimex SAM7 P256 This faceplate is a perfect fit for the Olimex SAM7 P64 or P256 development board and Chameleon 1 enclosure. With a Chameleon 1 enclosure, drill the designated hole patterns in the baseplate and your Olimex SAM7 board will line up perfectly with this faceplate. No nipping, guessing - great, professional fit for the Olimex SAM7 P2... $3.25
    Notify when back in stock.
    Conductive Fabric - Remnant MedTex130 Conductive Fabric - Remnant MedTex130   We tried our best to cut this stuff efficiently. Even the steadiest of scissors couldn't avoid it though. We ended up with some scraps. These bags contain a variety of remnant sizes that amount to roughly the standard 12x13". If you just plan to cut this fabric into strips anyway, this might be just right for you! We tried to g... $5.50
    Notify when back in stock.
    Replacement Soldering Tip - Bevel Replacement Soldering Tip - Bevel Shiny new tips for all your lead-free soldering needs. Each tip comes with a built-in ceramic heater element. This is the LF-3BC model and is great for larger soldering jobs like DB-9 connectors, SMA antenna jacks, etc. This tip is compatible with our 70W Analog and Digital soldering stations. $17.55
    Notify when back in stock.
- Back to Top -