Products

Normally open SPST micro tactile switch. Specifications Switch Type Tactile P...

This easy-to-use 18650 Battery Holder with 1-Slot offers micro-USB input, and it can be installed with a 18650 battery, one 5V/2A USB output, three...

When 0.1" is too big, and JST PH's too chunky, this ultra-slim 1.25mm connector cable is a reliable alternative. These are 1.25mm pitch but have a ...

This display module features high resolution, low power consumption, wide-angle and easy wiring. With a small size of 1.54”, it offers 240x240 reso...

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire...

We just love this little 1.8" TFT display, with true TFT color (up to 18-bits per pixel!), fine 160x128 resolution, two white LED backlight that...

Here’s a very cool TFT LCD display with 128 x 160 resolution and 18-bit color depth. The most unique feature of the screen is the ability to rea...

This 10 I/Os industrial PLC module(Optoisolated output) based on ESP32 devkit provides a simple and cost-effective solution to the applications of ...

This 10 I/Os industrial relay module (relay output) based on Arduino NANO provides a simple and cost-effective solution to the applications of i...

This 10 I/Os industrial PLC module(relay output) based on ESP32 devkit provides a simple and cost-effective solution to the applications of industr...

Used for Robot (obstacle detect​​​​ion) cleaning robot, human body detector, amusement equipment. It has a high speed auto focus and continuous vid...

Our go to choice for a through hole ADC. Easy to hook up to the Raspberry Pi, communicates via SPI - add up to eight 10-bit analog channels to your...

Our go to choice for a through hole ADC. Easy to hook up to the Raspberry Pi, communicates via SPI - add up to eight 10-bit analog channels to your...

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making it a great choice...

Keep your microcontroller tickin' with a ceramic oscillator. These little devices are bread-board friendly (0.1" pin spacing) and easy to use. They...

This is a blank 13.56MHz RFID/NFC card - often used for train/bus passes but also found in other systems where a proximity card is desired. The ...

This is a blank 13.56MHz RFID/NFC embedded in a phone charm - often used for train/bus passes but also found in other systems where a proximity ...

This is a clear 13.56MHz RFID/NFC Tag with an NTAG203 chip - often used for train/bus passes, information sharing, and contactless payment, but als...

Crystal oscillators provide an extremely accurate timing signal to devices that need to synchronise clocks and data streams.These crystals are idea...

This 16×2 LCD packs 32 characters into an outline smaller than that of most two-line displays. This unit uses the HD44780 interface found on most ...

The 1Sheeld+ is an easily configured shield for Arduino. It has a built-in Bluetooth Low Energy (BLE) module that gives to your Arduino the c...

1Sheeld turns your smartphone into a re-configurable Arduino shield 1Sheeld is a new easily configured shield for Arduino. It is connected to...

1Sheeld+ is a "Bluetooth LE Tethered" shield for Arduino. Plug it into your Arduino and then run the matching mobile app on your tablet or...