Products

2.4G 3dBi WiFi Antenna for DIY projects.Electrical Characteristics Frequency: 2400 ~ 2500 MHz S.W.R. <= 2.0 @ 2400 MHz ~ 2500 MHz Antenna Gain: ...

This is a 2.4G 4dBi WiFi Antenna with ipex13 for DIY projects.Electrical Characteristics Frequency 2400 ~ 2500 MHz S.W.R. <= 2.0 @ 2400 MHz ~ 25...

This outdoor antenna will receive or transmit signals up 4 miles away under ideal circumstances. Normal conditions will allow it to operate between...

This is an omni-directional antenna with an IPEX connector. Its working frequency is 2.4GHz which meets most requirements of Wi-Fi devices. W...

This adhesive, omni-directional antenna is perfect for situations when you’re trying to get a signal out from a transmitter that you’ve jammed down...

2.4GHz ceramic chip antennas. Very small antennas that work nicely with the Nordic ICs. Don’t expect these little guys to perform as well as their ...

This 4"/100mm long swivel dipole antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireles...

This 8"/200mm long swivel dipole antenna has 5dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireles...

2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. The F...

Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. ...

This 4" / 100mm long flexible uFL 2.4GHz antenna has approx 4DBi gain and a 50Ω impedance so it will work fantastically with just about any 2.4-2.5...

The GW.17 Click–in Terminal Antenna is a high performance robust 2.4GHz dipole antenna designed for quick assembly onto finished products. The spec...

Duck antennas offer great range in a rugged option for wireless technologies. This 2.4GHz Antenna adds the ability to be directly panel-mounted. It...

These 5G antennas are designed for 5G modules and equipment that require high efficiency and peak gain to deliver excellent throughput for access p...

If you're building a Raspberry Pi project and need to send data back-and-forth, the WiFi module built into newer Pi's should be fine for most cases...

GSM antenna for 800/900/1800/1900 GSM network.Features Connector: ipex13 Frequency:800~960,1710~2170 mHz

Increase your range with this 1/2 wave duck antenna for the European LoRa band. Designed for 810-910 MHz (868MHz center frequency) it is ideal for ...

This is a small 1/4 wave rubber duck antenna for (European band) LoRa or other 868MHz communication. Antenna has a center frequency of 868MHz and u...

This LoRa Antenna Kit is meant for use with the LoPy LoRa, WiFi and BLE board or the SiPy Sigfox, WiFi and BLE board. But it's good for any 900M...

900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. The FC...

If you need maximum distance for your LoRa project you need this incredibly durable, outdoor antenna with 6dBi gain. This 915MHz antenna is 4...

Increase your range with this ½ wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes an RP-SMA connector and ...

A small ¼ wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and utilizes an RP-SMA conn...

Introducing the Adafruit ESP32-S3 Feather 8MB with w.FL Antenna - the perfect way to kickstart your projects with the powerful ESP32-S3 chip from E...